Rupture disks or Bursting disks! this article will draw some general overview on these devices and touch on their types as well as sizing methods.

# WeBBusterZ

## Thermosiphon Reboilers a brief overview

Thermosiphon Reboilers are often used in industry, this article will briefly touch on the available type of reboilers in industry. then look into thermosiphon reboilers types, their advantages, disadvantages, compare them to other types and attempt to answer some common questions. The article will also attempt to highlight any industry […]

## Baffles in heat exchangers

Baffles in heat exchangers are often used as a core element in any shell and tube heat exchanger design. This short article will discuss the use of baffles and some common guidelines on their usage in heat exchangers.

## Tube pitch in heat exchangers questions answered

Do you have some questions about tube pitch in heat exchangers! why not read this article

## How to calculate the Overall Heat Transfer Coefficient

How to calculate the Overall Heat Transfer Coefficient? Heat exchanger setup typically involves two flowing fluids separated by a solid wall. Heat is first transferred from the hot fluid to the wall by convection, the heat is then transferred through the wall by conduction, and lastly the heat is transferred […]

## What is a compact heat exchanger?

Definition Compact heat exchanger can be characterized by its high ‘area density’ this means that is has a high ratio of heat transfer surface to heat exchanger volume. So Compact heat exchange is characterized by high heat transfer surface-area to volume ratios and high heat transfer coefficients compared to other […]

## Pipe Friction Head Loss Calculation

Pipe friction head loss calculation Pipe friction head loss calculation is important for sizing pumps, several equations have been developed to calculate pipe friction head loss, this article will explore the popular methods available.

## Difference between Fanning friction factor and Darcy friction factor

What is the Difference between Fanning friction factor and Darcy friction factor? Fanning friction factor The Fanning friction factor is defined as follows: ff = fd /4 Where; ff =Fanning friction factor fd =Darcy friction factor Darcy friction factor The Darcy friction factor is defined as follows: fd = 4 […]

## Hazen-Williams equation

Hazen-Williams equation is a popular approach for the calculation of head loss of liquid in piping systems. In this method, Hazen-Williams coefficient is introduced to the equation, the coefficient eliminates the need for using Reynolds number. The Hazen-Williams coefficient is mainly used to account for the pipe roughness or efficiency.

## Common Causes of Overpressure

Common causes of overpressure below is a list of Common causes of overpressure in process operation. Utility failures, including: General power failure Partial power failure Loss of instrument air Loss of cooling water Loss of steam Loss of fuel gas or fuel oil. Loss of cooling duty, caused by: Loss of […]